The Hi-Build art resin starter kit is a great introduction to 3D resin art, it is perfect for Blob Art, Dot Art, Geode Art & doming. You will SAVE 50% on the cost of the products bought separately!
It's so easy to create a beautiful piece of resin artwork using Eli-Chem Hi-Build and pigments. If you have never tried resin art before then this is a great way to start working with a different type of resin art. Simply follow the step by step instructions on our infographic and get creative.
- Perfect for Blob art, 3D collage work & Geode art
- Black, white and metallic silver colourway
- No slumping or sliding
If you are an experienced artist, why not buy pack as a gift for friend? The pack will be delivered in a plain box, along with instructions on how to use the products and a cotton gift bag. All you need to do is gift it.
For the starter kit we use Hi-Build Clear Artwork Resin as the base, it is a two component polymer material that produces an optically clear, high gloss finish on many surfaces e.g canvas, wood, mdf, glass, perspex, concrete and metal. It is ambient temperature curing, solvent free, high build and UV stable.
Resin Art Gift Pack contains:-
- 1 x 400g Hi-Build Art Resin Tester (200g resin & 200g hardener) & mixing stick
- 1 x resi-TINT MAX 50g Blackout
- 1 x resi-TINT MAX 50g Titanium White
- 1x resi-METAL 100g Aluminium
- 1 x large measuring cup
- 2 x small measuring cups
- 2 x wooden mixing sticks
- 1 x pair nitrile gloves
- 1 x Cotton gift bag
- 1 x instructions
For more ideas and inspiration see our Hi-Build Artwork Resin product page .
This kit contains only black, white and metallic silver pigments but top up packs of resi-TINT MAX are available to buy as singles or packs of 3, 5 and 10 so that you can make your own unique colourways.
Application video for Hi-Build 3D Art Resin
|Mix ratio|| by volume: 100 parts resin to 100 parts hardener
by weight: 100 parts resin to 90 parts hardener
|Surfaces||canvas, wood, MDF & glass|
|Curing time||second layer after 20 minutes, touch dry in 2-3 hours at 23°C, full cure in 4-5 days|
|Coverage||1 litre of the mixed product will cover approx. 1.43 m²@ 0.5 mm thick (1kg = 1 litre)|
|Pot Life||15-20 minutes at 23°C (250g mixed mass)|
|Shelf life||one year in sealed containers|
The mixing ratio must be accurately followed to achieve perfect results. It is not possible to change the ratio which would result in the resin not drying properly and lower mechanical properties.
The mixed components should be thoroughly stirred for 3-4 minutes to ensure an even consistency. Epoxy systems tend to heat up in a pot than as a thin film, only mix the amount needed for use within the pot life of the product. If it’s too gloopy to measure properly, simply pre-warm the containers by placing in hot water to lower the viscosity.
Pour small amounts of the mixed Hi-Build resin into each of the 2 small cups provided in the kit. If you have bought a top up pack of pigments simply add more cups and split the Hi-Build between all the cups. Add the resi-tint MAX to the resin in the small cups one drop at a time. They are very concentrated so you will need They are very concentrated so you only need a small amount per cup.
The product can then be dropped onto the surface to create domed 3D shapes or lines. The resin pour is more controllable if you drop using a plastic spoon
Health & Safety
Although our resins are formulated with the most modern and safest epoxy chemicals available, all epoxy resins are chemicals and should be managed and handled with proactive safety hygiene and responsible care.
- Always wear nitrile gloves (or use a specialist resin barrier cream)
- Wear a respirator when sanding partially-cured resin
- It is advisable to work in a well ventilated room
- We advise the use of safety goggles
- Avoid skin contact (if resin gets on skin wash with plenty of soap & water)
- DO NOT eat, drink or smoke while working
- In case of eye contamination wash with plenty of water for 15 minutes and consult medical advice immediately
Adding inks/paints/mica powder/glitter to epoxy resin will change its properties and may reduce its non-toxicity. If you use alcohol inks DO NOT use a flame to remove bubbles, as alcohol is flammable.
Resin Art Gift Pack Instructions PDF
MasterCast Art Resin instructions PDF
MasterCast Art Resin Safety Data Sheet PDF
Resin Art Gift Pack - Hi-Build Monochrome
- Brand: Eli-Chem
- Product Code: RAGPHBM
- Availability: 50
People who viewed this product also liked
Tags: starter kit, resin art, art resin, resin art gift, art resin starter pack, monochrome, opaque, hi-build, 3d